The patented Danner pump, which is sold under the Supreme Pondmaster Mag-Drive utility pump name, uses magnetic-drive technology to effectively power many filtration and pump applications. These submersible pumps, which do not have any bearings to rust or wear out, house copper-wire windings filled with epoxy. It is essential that the epoxy be air-free in order to have a reliable pump.
The Posiratio meter, mix and dispense system was employed to dispense 350-cc shots of completely air-free epoxy every 30 seconds. A 1:1 mix ratio of a two-part epoxy with a gel time of 1.5 hours is accurately dispensed via a Twinmixer automatic dispense valve. The material is kept separate until it reaches a disposable Posimixer motionless mixer.
With exceptionally reliable, low-cost and easy-to-use equipment, Liquid Control was able to provide a precision dispensing solution to fit the needs of its customer.
Click here for a PDF of our "2002 Guide to Dispensing and Curing Equipment."
Additional information on the PosiratioR meter, mix and dispense system is available from Liquid Control Corp., 8400 Port Jackson Ave., N.W., N. Canton, OH 44720; phone 330-494-1313; fax 330-494-5383; e-mail salesinfo@liquidcontrol.com; or visit the Web site www.liquidcontrol.com. Or Circle No. 74.