- THE MAGAZINE
- INFO FOR...
- ASI Store
- ASI Top 25
- ASI End User
- Classifieds and Services Marketplace
- List Rental
- Market Trends
- Custom Content & Marketing Services
- ASI Readers' Choice Awards
The Fulfill system replaces manual melter monitoring and refilling with an automatic, controlled process, decreasing production staff’s exposure to hot surfaces, molten adhesive, and repetitive lifting of adhesive.
As adhesive is dispensed, levels in the melter tank decrease. When a “low” level is reached, a sensor transmits a signal to a vacuum wand, which conveys adhesive pellets, pastilles or mini-slats directly to the melter tank. By automatically adding small quantities of adhesive at needed intervals, the system keeps the tank from running dry, minimizing missed beads and package rejects. A constant adhesive level also reduces variations in adhesive temperatures, resulting in better bonding.
The system is closed to ambient air, preventing adhesive contamination by dirt, dust or other debris.
Standard Fulfill retrofit system features include a vibrating vacuum wand to help prevent adhesive from sticking in the tote container; an external control box with membrane panel; a fill/fault indicator; and a disposable filter, for easy maintenance.
Factory pre-assembled and pre-calibrated components allow simple on-site installation.
For more information, visit www.nordson.com.