Green Products/Applications

Green Materials of Construction

August 1, 2006
/ Print / Reprints /
ShareMore
/ Text Size+
An emerging market segment



For the first time, formulated product (including adhesives, sealants, coatings, etc.) producers are developing products with environmentally responsible properties because of the needs of the market, not to meet mandatory governmental regulations. The emergence of specifications and certifications of materials that meet certain environmental criteria is emerging in the building and construction industries of North America and Western Europe. While not overwhelming at this point, the trend has taken hold and is somewhat analogous to the ISO certification trend of the 1980s and ‘90s, and may become a basic requirement for participating in certain segments of the construction industry in the very near future. ChemQuest forecasts that this trend will be a factor driving new product development throughout the adhesives and sealants value chain over the next decade.

This article provides an overview of the trend, along with guidance on the facets that impact adhesives and sealants producers and users.

Arguably, the green trend started in the 1970s with the promulgation of the Clean Air Act. This legislation led the Environmental Protection Agency to develop industry- and product-specific regulations limiting certain chemical and particle emissions into the air. Much of the product-development activity in the formulated markets has been driven by this single piece of legislation since then. However, the 1990s saw the emergence of non-governmental interests hoping to create a green "industry" with non-regulatory incentives for designers, product manufacturers and builders to create building projects with more regard for the environment. Much effort was placed on building materials, and three organizations have led this trend in North America.

  • Green Seal promotes the manufacture, purchase and use of environmentally responsible products and services. Green Seal is focused entirely on specifications and standards for materials of construction, with special emphasis on buildings within the government and institutional markets, such as lodging and universities.
  • U.S. Green Building Council provides a list of standards for environmentally sustainable design and construction through its Leadership in Energy and Environmental Design (LEED) Green Building Rating System. The LEED program is designed to define, promote and recognize building projects with sustainable environmental benefits. LEED also encourages "green" competition among building designers and contractors. LEED is aimed primarily at overall building design and construction methods, and generally defers to and/or mimics other organizations for specific product specifications.
  • Greenguard Environmental Institute replaced the AQSpec List in 2001, and, much like Green Seal, provides product certification of materials of construction based upon proven emission standards with the goal of improving interior air quality. Greenguard's original goals focused on emissions, but recently expanded to certify design, materials and construction methods to reduce the risk associated with mold.
The green industry continues to struggle with clearly defining the attributes associated with environmentally responsible building products. The industry debate ranges from air quality attributes (e.g., VOC, greenhouse gases, mold generation) to recycle content, product longevity, manufacturing and application energy requirements, renewable sources of raw materials, maintenance, and operating costs, etc.

Green Seal has taken a comprehensive approach to specifying those product attributes that are generally considered environmentally responsible. The specific standard of interest to the adhesives industry is GS-36 (http://www.greenseal.org/certification/standards/commercialadhesives.cfm ), which covers adhesives use for ABS/PVC pipe, carpet pad, ceramic tile, floor coverings, cove base, construction, contact bonding, roofing, wood flooring and glazing (see Table 1).

U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED) is an overall project certification program. The LEED qualifications for adhesives are less direct in that a project receives certification points for the use of materials that meet LEED standards. The adhesive standard can be found at https://www.usgbc.org/ShowFile.aspx?DocumentID=1095 and is shown in Table 2 (note the reference to certain portions of the Green Seal specification).

Greenguard has taken an even more specific product approach focused exclusively on the impact materials have on indoor air quality. Rather than limiting formulations, Greenguard limits the impact a product can have on the air quality of the immediate environment in which the product is applied and installed (see Table 3).

ChemQuest expects government regulations to become less important in driving new product development over the next 10 years as the free market mechanisms associated with the green industry trend broaden and grow. The competition that arises from these mechanisms will result in new formulations and new raw materials to support the ever-increasing needs of the designer/architect and the builder.

Michael D. Brown is vice president of The ChemQuest Group Inc., Cincinnati, OH, an international strategic management consulting firm specializing in the adhesives, sealants and coatings industries.

For more information, contact The ChemQuest Group Inc., 8150 Corporate Park Drive, Suite 250, Cincinnati, OH 45242; phone (513) 469-7555; fax (513) 469-7779; or visit http://www.chemquest.com .

Links

Did you enjoy this article? Click here to subscribe to Adhesives & Sealants Industry Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

In-Depth Features

These articles detail advantages and innovations for multiple end uses.

Podcasts

ExxonMobil Tackifier Expansion

Dwight Tozer, vice president of ExxonMobil’s Adhesion Industry business, discusses the company’s latest tackifier expansion project with Editor-in-Chief Susan Sutton.

More Podcasts

THE MAGAZINE

Adhesives & Sealants Industry Magazine

ASI April 2014 cover

2014 April

Our April issue focuses on pressure-sensitive adhesives, including a preview of PSTC's 2014 Tape Summit, as well as converting/packaging and composites!

Table Of Contents Subscribe

THE ADHESIVES STORE

handbook-sealant-tech.gif
Handbook of Sealant Technology

The Handbook of Sealant Technology provides an in-depth examination of sealants, reviewing their historical developments and fundamentals, adhesion theories and properties, and today’s wide range of applications.

More Products

asi1211p_Cover-DE.gifASI's Buyers' Guide

Annual purchasing resource for equipment used in the manufacture/formulation of adhesives, sealants, pressure sensitives, tapes and labels and for application of finished adhesives. 

Clear Seas Research

With access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

facebook_40px twitter_40  youtube_40pxlinkedin_40