New Products

New Products (Week of 10/30/06)

October 30, 2006
/ Print / Reprints /
ShareMore
/ Text Size+

ASYMTEK: Coating Jet

Using a needle design with non-contact jetting action and fast pulse-width modulated control, the SC-400 PreciseCoat™ Conformal Coating Jet delivers to areas not accessible by other applicators. Small volumes and precision control of the conformal coating material enable line widths down to 1.2 millimeters (0.05 inch) wide. Film thicknesses of 15 micrometers are achievable when using solvent-based material. Acrylics, silicones, urethanes, UV-cure and water-based materials with a viscosity range of 1 to 850 cps can be jetted. The PreciseCoat Jet provides flexibility for many diverse conformal coating applications in industries such as automotive, commercial, avionics, military and the medical market. Multiple dot sizes can be delivered from the same applicator, yielding small volumes with good volume control. A dual-valve configuration is available when the operation requires coverage of a large area in addition to precision conformal coating.

For more information, visit http://www.asymtek.com .

CONPROTEC: Dispensing System

The MIXPAC® F System consists of a manual or pneumatic dispensing gun, a cartridge and a static mixer, all designed to work together as an integrated, high-performance system. MIXPAC Cartridge Dispensing Systems are used to dispense two-component adhesives in a variety of volumetric ratios. The F System features an improved, state-of-the-art design to the cartridge, static mixer and nose plug interface. This improved design allows for the mixing and dispensing of higher-viscosity adhesives, and also allows for higher pressures in dispensing.

For more information, visit http://www.conprotec.com or call (603) 893-2727.

NOVEON: Copolymer

Carbobond® 2862 copolymer from Noveon offers excellent adhesion to a variety of printed substrates. Ideal for blister-pack and heat-seal coating applications, Carbobond 2862 copolymer combines favorable properties from both solvent-based and water-polymer systems for added flexibility in a functional coating. This product features rapid sealing and low activation temperatures. It can be formulated as a blister pack coating to seal properly up to 20-25°F lower than typical waterborne technology, and is within 10-15°F of any solvent-based system. As a result, converters can run at faster line speeds and benefit from the higher efficiencies. Carbobond 2862 copolymer also has gloss characteristics that exceed waterborne polyurethane dispersions and mirror solvent-based systems, providing higher aesthetic value.

For more information, visit http://www.noveoncoatings.com .

SEALANT EQUIPMENT & ENGINEERING: Dispense Valve

The new Model 2600-001-006/7 Tip-Seal® dispense valve was designed for high flow rates and precision fluid control of level-seeking materials, and is ideal in applications requiring high-volume fluid transfer, precise level control for filling operations, and dripless valve shut-off. The valve assembly consists of a double-acting actuator, a 13.7" (350 mm) extension nozzle and a carbide Tip-Seal needle to prevent dripping fluid material at shut-off. For high-volume fluid transfer, the Tip-Seal Valve can flow up to 6 gpm (22.7 lpm) with the 0.406" (10.3 mm) orifice nozzle. For accurate filling of housings, containers and vessels, the optional level-sensing probe and controller is used to automatically stop the flow of material when the desired fluid level is reached.

For more information, visit http://www.sealantequipment.com , call (734) 459-8600 or e-mail valves@sealantequipment.com .

Did you enjoy this article? Click here to subscribe to Adhesives & Sealants Industry Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

In-Depth Features

These articles detail advantages and innovations for multiple end uses.

Podcasts

ExxonMobil Tackifier Expansion

Dwight Tozer, vice president of ExxonMobil’s Adhesion Industry business, discusses the company’s latest tackifier expansion project with Editor-in-Chief Susan Sutton.

More Podcasts

THE MAGAZINE

Adhesives & Sealants Industry Magazine

ASI April 2014 cover

2014 April

Our April issue focuses on pressure-sensitive adhesives, including a preview of PSTC's 2014 Tape Summit, as well as converting/packaging and composites!

Table Of Contents Subscribe

THE ADHESIVES STORE

handbook-sealant-tech.gif
Handbook of Sealant Technology

The Handbook of Sealant Technology provides an in-depth examination of sealants, reviewing their historical developments and fundamentals, adhesion theories and properties, and today’s wide range of applications.

More Products

asi1211p_Cover-DE.gifASI's Buyers' Guide

Annual purchasing resource for equipment used in the manufacture/formulation of adhesives, sealants, pressure sensitives, tapes and labels and for application of finished adhesives. 

Clear Seas Research

With access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

facebook_40px twitter_40  youtube_40pxlinkedin_40