New Products

New Products (Week of 9/25/06)

September 25, 2006
/ Print / Reprints /
ShareMore
/ Text Size+

IPM: Drum Pumps

Many two-component coatings use isocyanate in the hardner component. When changing drums, isocyanate forms sharp crystals on pump surfaces, damaging packings and shortening pump life. IPM's OP-232C pump limits crystal formation to non-critical areas, allowing rods and packings to remain free of crystals, improving packing life. A quick-release bung adapter provides fast drum changes, and hoses can remain attached, further limiting crystal formation. Improved construction features allow periodic cleaning of critical pump passages to provide virtually unlimited service life.

For more information, call (253) 859-3882 or e-mail info@ipmpumps.com .

OK INTERNATIONAL: Handheld Convection Tool

The new HCT-900 Hand Held Convection Tool is a low-cost rework system providing the flexibility to handle a wide range of thermally demanding production and rework applications, including lead-free. Typical applications for the 300W unit include removal or replacement of QFPs, PLCCs, SOPs and TSOP devices. It can also be used to provide heating and reflow for touch-up work, as well as heat shrink and other local heating applications. The closed-loop thermocouple feedback regulates output temperatures, and control temperatures can be set in the range 100-500ºC (212-293ºF). The user simply sets the heat and airflow control dials to the required values for the application. The unit maintains the required temperature automatically, even if airflow is adjusted. The unique low-noise pump (less than 45 db) provides precision airflow control for the most demanding applications. A power-off, cool-down function retains airflow as the unit powers down for efficient heater cooling and reduction of thermal stress. A range of nozzles is available from OK International that work for general purpose applications or specific SO and TSOP packages, or PLCC, BQFP, and QFP devices. In addition, the system also accepts many industry-standard nozzles.

For more information, visit http://www.okinternational.com .

POLYSCIENCES: Water-Indicating Paste

SAR-GEL® is an easy-to-use water detection paste that signals the presence of water by a highly visible color change. It is supplied as a white paste that changes to a bright red color even in the presence of low levels of water. A small amount of SAR-GEL applied to the end of an applicator or water level dipstick is sufficient to alert the user to the presence of unwanted water. This product is supplied in individual "toothpaste type" 1 oz. cartridge tubes for easy dispensing, and is also available in cases of 12 x 1 oz tubes.

For more information, visit http://www.polysciences.com .

SEALANT EQUIPMENT & ENGINEERING: Fluid-Control Valve

This company's new Model 2200-396-026 heated fluid-control valve is designed for precision control of low- to high-viscosity materials. It is used in a wide variety of applications for the transfer, delivery and dispensing of heated adhesives, sealants, and lubricants. The heated flow-control valve is typically used to start and stop the flow of material on the outlet of supply pumps, on the inlet and outlet of pipe manifolds and headers, on the inlet and outlet ports of metering assemblies, and on the inlet of dispense hoses. It is also used as a high-flow dispense valve. The unique No-Drip® high-flow valve design is ideal for controlling the flow of heated adhesives and sealants such as acrylics, epoxies, polyurethanes, silicones, lubricants, and warm-melt materials requiring elevated temperatures. The valve opens and closes its carbide needle and seat to precisely start and stop material flow up to 5000 psi. The 60:1 air-to-fluid power ratio provides instantaneous on-off control of material flow. The heated flow-control valve is double-air-operated through 1/4"-NPT ports to ensure positive start and stop of material flow. The valve has 1/2"-NPT fluid inlet and outlet ports for high-volume flow of viscous materials. The valve includes two holes for easy mounting.

For more information, visit http://www.sealantequipment.com/catalog/valves-page9.htm , call (734) 459-8600 or e-mail valves@sealantequipment.com .

Did you enjoy this article? Click here to subscribe to Adhesives & Sealants Industry Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

ASI April 2014 Photo Gallery

Our April 2014 issue is now available!

Podcasts

ExxonMobil Tackifier Expansion

Dwight Tozer, vice president of ExxonMobil’s Adhesion Industry business, discusses the company’s latest tackifier expansion project with Editor-in-Chief Susan Sutton.

More Podcasts

Adhesives & Sealants Industry Magazine

ASI Sept 2014 cover

2014 September

Our September issue features articles focusing on high-tech applications and raw materials, as well as a preview of the ASC Fall Convention and Expo. Check it out today!

Table Of Contents Subscribe

THE ADHESIVES STORE

handbook-sealant-tech.gif
Handbook of Sealant Technology

The Handbook of Sealant Technology provides an in-depth examination of sealants, reviewing their historical developments and fundamentals, adhesion theories and properties, and today’s wide range of applications.

More Products

ASI 2014 Buyers GuideASI's Buyers' Guide

Annual purchasing resource for equipment used in the manufacture/formulation of adhesives, sealants, pressure sensitives, tapes and labels and for application of finished adhesives. 

Clear Seas Research

With access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

facebook_40px twitter_40  youtube_40pxlinkedin_40 google+ icon ASI 30px