Adhesives Magazine
ADVERTISEMENT

ROSS: Ribbon Blenders

April 8, 2013

This company’s new 42B model ribbon blenders can be used for straightforward blending of powders or other solid raw materials with a bulk density of 35 lbs/cu ft or lower.Ross Ribbon Blenders The blenders are offered with the following standard features:

  • Stainless steel wetted parts polished to 60-grit finish
  • Solid-shaft double ribbon agitator designed for center discharge
  • Knife gate discharge valve
  • One-, two- or three-piece cover (depending on the size) supplied with neoprene gaskets
  • Clamps to eliminate dusting and fume migration
  • Safety limit switches to prevent operation when covers are raised
  • Stuffing boxes with easily disassembled split housing
  • Teflon braided packing
  • 230/460 volt, 60 Hz, three phase TEFC motors
  • Mounted on supports to provide 36-in. discharge clearance
  • Available from 1/2 to 1,000 cu ft working capacity

Customizable ribbon blenders are also available for product densities above 35 lbs/cu ft. Optional features including pneumatically operated covers and valve, bag dump station, safety grating, high-speed chopper, vacuum/pressure design, heating/cooling jacket, liquid spray bar, load cells, and PLC recipe systems.

For additional information, visit www.mixers.com.