DOW AUTOMOTIVE INTRODUCES NEW TWO-COMPONENT STRUCTURAL ACRYLIC ADHESIVE
BETAMATE™ LESA is a two-component, high-strength, toughened acrylic adhesive designed for structural applications. This system was developed primarily for use in bonding low-energy surfaces without surface pretreatment, including polypropylene (PP) and polyethylene (PD, HDPE). The mix ratio for this system is 1:1 by volume. BETAMATE LESA can be used for bonding similar or dissimilar thermoplastic or thermoset resins, coated metallic substrates and glass.
For more information, visit http://www.dowautomotive.com .
DOW CORNING OFFERS UPDATED RELEASE COATING AND PSA GUIDES
Dow Corning has published two new Release System Information Guides for its Syl-Off® brand tin-catalyzed silicone release coatings - one guide for solvent-based products and a second guide for emulsions. The company has also updated its selection and application guide for Dow Corning® brand pressure-sensitive adhesives. The new Release System Information Guides include descriptions of recent additions to the Syl-Off tin-catalyzed solvent-based and emulsion product lines. Updated handling and application information, plus new formulation suggestions, are also included. Products listed in the guides are available globally.
For more information, visit http://www.dowcorning.com .
I&J FISNAR INTRODUCES NEW DISPENSING VALVE
The VMP30H is a multipurpose, mini-poppet pneumatic valve designed for controlled dispensing of low- to high-viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases and filled materials. The poppet design minimizes surface area and friction between the valve piston and the material, making it ideal for filled materials and extending the life of the valve. A diaphragm located between the driving parts and the wetted parts also increases the valve life and reduces valve maintenance. Shot sizes may be fine-tuned by turning the control knob at the top of the valve. The VMP30H valve features a "suck-back effect," which draws material back into the fluid body at the end of the dispensing cycle. This eliminates lumping at the end of the needle after dispensing. The valve can be controlled with a standard I&J Fisnar Inc. dispenser or with the VC-1195A 4-way valve controller, which closes the valve more quickly.
For more information, visit http://www.ijfisnar.com , call (201) 796-1477 or e-mail email@example.com .
OK INTERNATIONAL OFFERS NEW LOW-COST TAPER NEEDLES
Double Helix TT-Series Dispensing Needles are designed with double helix threads to provide secure connection to industrial syringes and dispense valves. The needles are engineered for precise, consistent dispensing of medium- to high-viscosity materials. Thanks to a unique 27-gauge (0.20mm ID) version, micro-dot dispensing is also possible. Manufactured from polyethylene, the Double Helix TT-Series Dispensing Needles are compatible with a range for chemicals and UV-cure adhesives. The needles are now silicon- and chloride-free to eliminate the possibility of contamination from these materials, particularly in sensitive areas such as medical-related industries where contamination would present a significant risk.
For more information, visit http://www.okinternational.com .
SEEPEX OFFERS PROGRESSIVE CAVITY PUMP BROCHURE
The 2006 User Advantages brochure highlights the unique and innovative benefits of the seepex progressive cavity pump design. It shows various geometries that result in lower wear rates and thrust loads. Also featured are close-coupled pumps and the exclusive "plug-in" drive shaft that allows for easy replacement of the pump's "wet end." Other features include: sealed and lubricated universal joints with reliable, replaceable bushings; improved rotor surfaces; harder rotor coatings; molded-to-size, shrink-compensated stators; a stator retensioning device; and a patented run-dry protection device.
For more information, visit http://www.seepex.com , e-mail firstname.lastname@example.org or call (937) 864-7157.