MoreSartomer Co. has announced
the opening of a plastics laboratory to help further develop its global
plastics business. The lab, located at the company’s Exton, PA,
headquarters, is dedicated to research and development of functional additives
for plastic applications.
The new lab allows Sartomer chemists to perform full pellet-to-pellet conversion, and to mold and test thermoplastics up to 400ºC. The facility includes a C.W. Brabender® extruder; a Morgan-Press molder; an Instron® POE2000 impact tester; an Instron tensile tester; a TA Instruments dynamic mechanical analyzer; a TA instruments differential scanning calorimeter; and a TA Instruments rheometer.
Sartomer’s Krasol®, Ricon® Poly bd® and SMA® resins can be used to modify plastic properties, including adhesion, barrier, compatibility, heat resistance, impact strength, flexibility, dielectric, compression set and melt-flow index. Sartomer will showcase these technologies in booth #45084 (South Hall) at NPE 2009, June 22-26, 2009, in Chicago.
For more information, visit www.sartomer.com.
The new lab allows Sartomer chemists to perform full pellet-to-pellet conversion, and to mold and test thermoplastics up to 400ºC. The facility includes a C.W. Brabender® extruder; a Morgan-Press molder; an Instron® POE2000 impact tester; an Instron tensile tester; a TA Instruments dynamic mechanical analyzer; a TA instruments differential scanning calorimeter; and a TA Instruments rheometer.
Sartomer’s Krasol®, Ricon® Poly bd® and SMA® resins can be used to modify plastic properties, including adhesion, barrier, compatibility, heat resistance, impact strength, flexibility, dielectric, compression set and melt-flow index. Sartomer will showcase these technologies in booth #45084 (South Hall) at NPE 2009, June 22-26, 2009, in Chicago.
For more information, visit www.sartomer.com.
