VISCOTEC: Rotorspray System for Volume-Dispensed Application
The vipro-SPIN is suitable for low- and high-viscosity lubricants, greases, and anaerobic or other adhesives.
Combined with different ViscoTec dispensers as a material feeder, the vipro-SPIN rotorspray reportedly enables non-contact, volume-dispensed application of adhesives or viscous greases in bore holes or internal threads. The company reports that the desired amount of material to be dispensed is applied in precisely defined quantities and with repeatable accuracy. The internal contours are wetted evenly and over a wide area. Due to the conical inner geometry of the spinner head, it is possible to use the rotorspray in both vertical and horizontal orientations.
The vipro-SPIN is suitable for low- and high-viscosity lubricants, greases, and anaerobic or other adhesives. A total of four different spin heads is available for a flexible coating of interior cylindrical surfaces with a diameter of approximately 16-50 mm. A plug-in cable, available in different lengths, allows the rotorspray to be easily integrated into various control unit systems.