New Products

New Products (Week of 8/21/07)

August 15, 2007
/ Print / Reprints /
ShareMore
/ Text Size+

BINKS: Website

This company has announced the launch of a new website designed to provide up-to-the-minute information about its products and services. The site is built around the company’s mission to be the preferred provider of liquid finishing solutions for industrial users and professional contractors.

“A big part of customer satisfaction is providing information to potential users with the utmost of ease and accessibility, while being diligent to make sure that information is thorough and understandable,” said Chuck Scott, Industrial Marketing manager. “Our new website will help spray finishers explore all of our offerings and easily match our solutions to their specific needs.”

Features include information on all Binks Industrial Finishing products and sections dedicated to technical training, literature, service, distributor locators, service parts, and new offerings. Quick links are provided by product classifications, and a success story section details some specific application solutions provided by Binks.

For more information, visit www.binks.com.

HENKEL: Die Attach Paste

Adding to its portfolio of productivity enhancing die attach materials, Henkel has developed and made commercially available Hysol® QMI708TM, a new die attach paste for use with copper leadframes. Designed for today’s challenging small footprint devices, Hysol QMI708 is a high-performance die attach paste that has been formulated specifically for small die on copper leadframes. The innovative material has been developed to attach die 2.5 mm x 2.5 mm and smaller in QFN and SOIC packages using copper finished leadframes.

Hysol QMI708 is highly conductive and exhibits extremely low bondjoint resistance as compared to competitive materials. This characteristic minimizes energy drainage and, therefore, produces a more efficient package. Another key differentiator of the material is its superior dispensability. When tested against competitive materials, Hysol QMI708 displayed 30-40% better dispensability. The material dispenses quickly with no tailing, is very simple and quick to set-up, and allows for an extremely wide dispense window.

For more information, visit www.henkel.com/electronics.

I&J FISNAR: Dispensing Robot

Model I&J7400 is the largest dispensing robot in this company’s current desktop robot series with a working area 15.75" x 15.75" (400 mm x 400 mm) and a footprint depth of less than 30 inches (760 mm) for mounting on an industrial workbench. Particular attention has been given to frame accuracy in an industrial robot of this size, and the base is a heavy-duty cast construction to maintain linear performance across the entire dispensing area. The robot is available in two models (I&J7400C [three axes] and I&J7400-R [four axes]) - and a handheld Teach Pendant is provided for simple and intuitive programming functions.

For more information, visit www.ijfisnar.com.

MOYNO: Metering Pump

Moyno, Inc. offers the Moyno® Metering Pump for economical and efficient performance when metering low-flow liquids in a wide range of processing applications, including dosing, sampling, and metering.

The progressing cavity design of the Moyno Metering Pump results in a smooth flow free from pulsations and variations in velocity and volume. This prevents material waste or mixture imbalance. Additional advantages and features of the Moyno Metering Pump include: sealed universal joints for longer life; low power consumption and operating costs; simple, on-site maintenance for reduced costs; no valves to clog, stick, or vapor lock; pressures to 300 psi; flow rates from 0.1 gph to 190 gph; and more.

The Moyno Metering Pump is available in bare-shaft, close-coupled and motorized configurations. All models are capable of handling a wide variety of fluids from clean, clear liquids to abrasive, corrosive fluids, solids in suspension and viscous materials.

For more information, visit www.moyno.com.

POWER ADHESIVES: Hot-Melt Applicators

This company’s new Tec 6300 and 7300 high-output industrial pneumatic spray hot-melt applicators are serious alternatives to traditional hot-melt application systems, eliminating expensive bulk melt tanks and fragile heater hoses. The Tec system consists of a handheld applicator with a throughput of 4.2 to 5.25 kilos per hour. A 3 m airline and electrical cable are supplied, which provides the operator with an easier-to-use and lighter alternative to the conventional heavy insulated hose associated with bulk melters. The applicator heats up in just 10 minutes, and the unit’s powerful heating device quickly melts the adhesive on demand once the trigger is pulled. Output is controlled by adjusting the air pressure, and spray pattern is varied by using a rear-mounted control knob.

For more information, visit www.poweradhesives.co.uk.

PRES-ON: Rubber Tape

Pres-On, a leading supplier and innovator in adhesive products, has introduced Pres-Bond P10600 Series cork and nitrile rubber composite tape. Versatile and rugged, it is ideal for a variety of OEM applications, from marine and RV flooring to padding and cushioning of store fixtures, furniture, and consumer appliances. It also is excellent as weather-stripping for wood and metal window sash.

The tape features an environmentally stable nitrile base material combined with a sponged synthetic cork that exhibits medium compressibility and heavy-duty resistance to oils, fuel and solvents. An acrylic adhesive provides powerful initial adhesion and a permanent bond on fiberglass, wood, plastic, and painted surfaces.

Pres-Bond P10600 tape is available in thicknesses of 1/32”, 1/16” and 1/8”, and in lengths of 60 to 100 feet. Standard width is 57 inches, but custom widths and shapes can be specially ordered.

For more information, visit www.pres-on.com.

Did you enjoy this article? Click here to subscribe to Adhesives & Sealants Industry Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

ASI April 2014 Photo Gallery

Our April 2014 issue is now available!

Podcasts

ExxonMobil Tackifier Expansion

Dwight Tozer, vice president of ExxonMobil’s Adhesion Industry business, discusses the company’s latest tackifier expansion project with Editor-in-Chief Susan Sutton.

More Podcasts

Adhesives & Sealants Industry Magazine

ASI October 2014 cover

2014 October

You won't want to miss our October issue: industry trends from the ASC, converting and packaging, testing, a preview of The Assembly Show, and more!

Table Of Contents Subscribe

THE ADHESIVES STORE

handbook-sealant-tech.gif
Handbook of Sealant Technology

The Handbook of Sealant Technology provides an in-depth examination of sealants, reviewing their historical developments and fundamentals, adhesion theories and properties, and today’s wide range of applications.

More Products

ASI 2014 Buyers GuideASI's Buyers' Guide

Annual purchasing resource for equipment used in the manufacture/formulation of adhesives, sealants, pressure sensitives, tapes and labels and for application of finished adhesives. 

Clear Seas Research

With access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

facebook_40px twitter_40  youtube_40pxlinkedin_40 google+ icon ASI 30px