- THE MAGAZINE
- INFO FOR...
- ASI Store
- ASI Top 25
- ASI End User
- Classifieds and Services Marketplace
- Product & Literature Showcases
- List Rental
- Market Trends
- Custom Content & Marketing Services
- ASI Readers' Choice Awards
This gasketing material can be dispensed into intricate and complex configurations with the benefit of in-line curing which allows for increased production speed, greater output, lower processing costs, and reduced inventories. It is a silicone-free, one-part resin requiring no mixing. GA-140 is low out-gassing, cures in seconds, and its viscosity allows for varying bead heights. It conforms to intricate channels or recesses and has excellent tear resistance for serviceable and limited-service applications.
DYMAX FIP gaskets cure completely in seconds, even in 1/4”-thick beads. Designed for flat flanges or wide shallow grooves, permanent FIP gaskets can eliminate the delay experienced with slow-curing resins as well as the design, inventory, and labor expense associated with pre-cut gaskets. DYMAX gaskets cure faster and deeper than UV silicone, and do not release corrosive chemical by-products upon cure.
For more information, visit www.dymax.com.