Formulators

Polymer Glossary

May 1, 2007
/ Print / Reprints /
ShareMore
/ Text Size+


Following is a list of terms relating to the manufacture of polymers and their definitions. See sidebar for abbreviations for the most common rubber polymer types.

Accelerator: Chemical added to increase curing rate.

Acrylonitrile: Unsaturated hydrocarbon containing nitrogen (CH2 CHCN) Part of nitrile rubber (NBR).

Activator: Chemical to activate the curing reaction.

Antioxidant: Chemical to reduce oxidation.

Antiozonants: Chemical to reduce ozone cracking.

Bladder: Inflatable bladder, used to form the tire in the mold during curing.

Blowing Agent: Chemical to make sponge rubber, forming the cells by release of gas.

Butadiene: Unsaturated hydrocarbon (CH2 CHCHCH2). Part of butadiene rubber (BR).

Calender: Machine with two or more rolls for making sheets.

Chloroprene: Base of chloroprene rubber (CR)-containing chlorine.

Coagulate: A substance that is precipitated from a liquid.

Copolymer: A polymer made of two or more monomers.

Cord Fabric: Used as reinforcement in rubber products like tires. Made of rayon, polyamide, polyester, etc.

Crazing: Small cracks on the surface due to weather.

Emulsion: A heterogeneous liquid with two or more substances dispersed in it.

Ethylene: Unsaturated hydrocarbon (CH2 CH2). Part of ethylene-propylene rubber (EPM or EPDM).

Extrusion: Process whereby rubber is formed by pressing through a die, e.g., profiles.

Flash: Excess rubber created during molding. Comes from overflow and injection feed system.

ISO 9000: Standardized management system for quality.

ISO 14000: Standardized management system for environmental assurance.

Isobutylene: Unsaturated hydrocarbon (CH3 C(CH3)CH2). Part of butyl rubber (IIR).

Isoprene: Unsaturated hydrocarbon (CH2 C(CH3)CHCH2) part of isoprene rubber (IR) and butyl rubber (IIR).

Kautschuk: Arising from the Indian name cahu-chu, meaning “the crying tree.”

Latex: The milky liquid in plants like the rubber tree and dandelion. An emulsion of rubber particles in water.

Monomer: Derived from Greek word mono, meaning one, and meros meaning part. Several monomers make a polymer.

Natural Rubber: Rubber extracted from Hevea Brasiliensis.

Polymer: Derived from the Greek word poly meaning many and meros meaning part. A polymer consists of a long molecular chain made of equal units (monomers).

Polymerization: Chemical reaction where several molecules of the same type are united to produce a bigger unit.

Propylene: Unsaturated hydrocarbon (CH2 CHCH3). Part of ethylene-propylene rubber (EPM and EPDM).

Prototype: A first model for checking a new product.

Sandblasting: Cleaning a surface by blowing sand particles.

Styrene: Aromatic hydrocarbon. Part of styrene-butadiene rubber (SBR).

Sulfur Bridge: Bridging two rubber molecules with a sulfur bond.

Synthetic Rubber: Man-made polymer.

UV Light: Invisible light with high-energy content. Used for making a rubber surface glossy.

Viscosity: A property in liquids and polymers that depends on inner friction. High viscosity means less flow than in substances with low viscosity.

Vulcanization: Derived from Vulcan, the mythological god of fire and smithery. Also called curing. When adding sulfur to a rubber compound, the sulfur forms crosslinks between the polymer chains, making the rubber elastic.

For more information, contact Trelleborg, phone 46 410 670 94, fax 46 410 427 63, or visit www.trelleborg.com.

SIDEBAR: Abbreviations of Rubber Polymers

ACM: Acrylic rubber

BIIR: Bromo butyl rubber

BR: Butadiene rubber

CIIR: Chloro buryl rubber

CM: Chlorinated Polyethylene rubber

CR: Chloroprene rubber

CSM: Chlorosulponated polyethylene rubber

ECO: Epichlorohydrin rubber

EPDM: Ethylene Propylene Diene rubber

FPM: Fluoro rubber

HNBR: Hydrogenated Nitrile rubber

IIR: Butyl rubber

IR: Isoprene rubber

MFQ: Fluoro-silicone rubber

NBR: Nitrile rubber

NR: Natural rubber

PO: Propylene oxide rubber

Q: Silicone rubber

SBR: Styrene-butadiene rubber

U: Urethane rubber

Links

Did you enjoy this article? Click here to subscribe to Adhesives & Sealants Industry Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

ASI April 2014 Photo Gallery

Our April 2014 issue is now available!

Podcasts

ExxonMobil Tackifier Expansion

Dwight Tozer, vice president of ExxonMobil’s Adhesion Industry business, discusses the company’s latest tackifier expansion project with Editor-in-Chief Susan Sutton.

More Podcasts

Adhesives & Sealants Industry Magazine

ASI August 2014 cover

2014 August

Our August issue includes what is traditionally our most popular article of the year: the ASI Top 25. You won't want to miss it!

Table Of Contents Subscribe

THE ADHESIVES STORE

handbook-sealant-tech.gif
Handbook of Sealant Technology

The Handbook of Sealant Technology provides an in-depth examination of sealants, reviewing their historical developments and fundamentals, adhesion theories and properties, and today’s wide range of applications.

More Products

ASI 2014 Buyers GuideASI's Buyers' Guide

Annual purchasing resource for equipment used in the manufacture/formulation of adhesives, sealants, pressure sensitives, tapes and labels and for application of finished adhesives. 

Clear Seas Research

With access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

facebook_40px twitter_40  youtube_40pxlinkedin_40 google+ icon ASI 30px