Henkel Corp. has introduced nine new products for maintenance and repair applications, including fast-setting adhesives, high-performance adhesives, plastic bonders, metal bonders and wood bonders.
The latest Loctite® adhesive innovations have been specially formulated to provide tough, durable bonds to a wide variety of surfaces. This new line:
- Eliminates or significantly reduces costly mechanical fastening methods such as rivets, screws and welds.
- Is ideal for quick repairs and structural assemblies.
- Provides excellent resistance to severe environmental conditions.
- Bonds dissimilar materials, such as metals to plastic.
- Fills large gaps between parts; and
- Features convenient packaging for maintenance use.
Loctite Ultra-Tough Bonder – A two-component epoxy containing KevlarTM, providing exceptional shock, vibration, impact, and peel resistance for the most demanding structural bonding applications in an MRO working environment.
Loctite High-Temp Bonder – An off-white, two-component epoxy paste that combines high strength at room temperature with exceptional performance in high temperature environments up to 400°F.
Loctite Chemical Resistant Bonder – A black, flowable, two-component epoxy exhibiting exceptional resistance to 20 common corrosive and aggressive chemicals, including acetone, MEK, methanol, IPA, diethyl ether, furfural, toluene, glycol, hexane and many others commonly found in a MRO working environment.
Loctite 30-Second Bonder – An amber, single-component, toughened, activator-cure acrylic with no mixing, no measuring, no mess, and minimal clamping. The bonder sets in 20 seconds and develops full strength in 30 minutes for quicker return to service. This bonder is ideal for bonding close-fitting parts.
Loctite 5-Minute Bonder – A clear, two-component, five-minute epoxy in a convenient 1:1 mix ratio that bonds virtually any material. It will also fill or seal cracks and rebuild worn surfaces. This bonder sets in five minutes, allowing quick return to service, and provides excellent moisture resistance and toughness.
Loctite Fast Cure Mixer Cups – Grey, pre-measured epoxy mixer cups (the epoxy sets in five minutes) ideally suited for applications requiring only a small amount of epoxy. Fills porosity and cracks, and adheres exceptionally well to metal, glass, wood, and hard plastics.
Loctite Plastic Bonder – An off-white, two-component acrylic that bonds well to most plastics, including PVC, polycarbonate, ABS, and FRP, and requires no surface preparation. Excellent gap filling for use on larger parts. Sets in 25 minutes.
Loctite Metal Bonder – An off-white, two-component acrylic that bonds well to most metals including steel, aluminum, stainless steel, and galvanized steel. Excellent gap filling for use on larger parts. Sets in 15 minutes.
Loctite Power Grab® Industrial Construction Adhesive – An off-white, single-component, heavy-duty, high-strength, construction-grade adhesive for interior and exterior repairs or building projects.
For more information on Loctite Bonding Adhesives and Henkel’s full line of Loctite products, call (800) LOCTITE (562-8483) or visit www.loctitemrobonders.com.