Adhesives and Sealants Topics - Articles - Page 407

EPA Celebrates 50 Years of Progress in Advancing Chemical Safety

Since 1970, the EPA has promoted innovation and advanced the science needed to reduce the environmental impacts associated with design, manufacturing, and use of chemicals.

March 12, 2020

In commemoration of the U.S. Environmental Protection Agency’s (EPA) 50th anniversary, the agency is celebrating progress that has been made in advancing chemical safety.

Polylactic Acid Polyols in Urethane Reactive Hot-Melt and Solventborne Adhesives

In addition to a low carbon footprint, polylactic acid brings value to multiple applications through performance attributes such as a high modulus, excellent solvent and grease resistance, and food contact compliance.

William Coggio

Mike Gehrung

Matt Tjosaas Danielle Varecková

March 12, 2020

Polylactic acid (PLA) is a well-known bio-based thermoplastic polymer.

SIKA CORP.: Easy-to-Remove Elastic Butyl Sealant

Recommended applications for SikaLastomer-714 include the sealing of bolt-in parts to vehicle flanges (i.e., truck sliders), as well as the sealing of gaskets to various substrate materials.

March 12, 2020

Sika Corp. recently introduced its SikaLastomer-714 butyl sealant for the U.S. transportation aftermarket.

Housing Production Shows Solid Start to 2020

Regionally in January 2020, combined single- and multi-family housing production increased 31.9% in the Northeast and 1.2% in the West.

March 11, 2020

While total housing starts decreased 3.6% in January 2020, overall permits surged to a 13-year high.

Avery Dennison Announces Change in Board Leadership

Patrick T. Siewert will serve as lead independent director, replacing David E.I. Pyott, who has decided not to stand for reelection so that he may spend time on other endeavors.

March 11, 2020

Avery Dennison Corp. recently announced an upcoming change in the leadership structure of its board of directors.

Nouryon and INEOS Nitriles Break Ground on New Facilities in Germany

The plants, which are due to be completed in 2021-2022, will produce raw materials for Nouryon’s biodegradable chelates.

March 10, 2020

Nouryon and INEOS Nitriles recently announced that they have broken ground on new facilities to be built at INEOS’ Köln site in Germany.

DISPENSE WORKS INC.: Benchtop Vision-Guided Dispensing System

Dispense Works reports that all motion, vision, and control system software for this dispensing system is written in house.

March 10, 2020

Dispense Works Inc. recently announced that its RP series robotic dispensing system with an optional vision-guided component performs pattern recognition and edge/hole detection for simpler setup and fixturing while assuring repeatability.

Chromaflo Technologies Names Davis Product Development Specialist in Coatings Department

Phenicia Davis is responsible for providing developmental and technical support to Chromaflo’s customer base by designing, planning, and executing project elements.

March 10, 2020

Chromaflo Technologies recently announced that Phenicia Davis has joined the company to serve as product development specialist in the Coatings Department.

Electric Vehicles and the Growing Significance of Adhesives and Sealants for Battery Assembly

Adhesives, sealants, and heat transfer materials used in battery assembly operations will find myriad opportunities in the exciting electric vehicle market.

Michael Pomykala

March 9, 2020

Electric vehicles (EVs) have been rapidly adopted in recent years, and the rate of market growth has shown to be significantly higher than that of the fuel-injected automotive market. Indeed, the global stock of electric cars surpassed five million in 2018.

Top 5 News that Sticks

Henkel Retains #1 Spot and Adds Second Story to Top 5

An announcement regarding Henkel’s new facility in India retains its number-one position on our list, while the company's Mexico footwear business divestment comes in at number two.