Adhesives and Sealants Topics - Articles - Page 439

3M and The BrandLab Partner to Expand Diversity in the Design Sector

The design talent collaboration includes the expansion of existing internship programs and the addition of a classroom program.

March 13, 2020

3M and The BrandLab recently announced a two-year initiative (2020-2021) focused on driving diversity within creative career paths.

Azelis Americas CASE Appointed U.S. Distributor for Momentive Polyurethane Additives

Effective May 10, 2020, the agreement expands Azelis’ commercial relationship with Momentive.

March 13, 2020

Azelis Americas CASE, LLC recently announced that it has been appointed U.S. distributor by Momentive Performance Materials USA LLC for its polyurethane additives products.

Dow Technologies Help Retrofit Olympic Stadium for Olympic Games Tokyo 2020

According to Dow, its technologies will help enable, protect, enhance, and maintain the integrity and performance of key infrastructure systems for the 72,400-sq-m Olympic Stadium.

March 12, 2020

Serving as the main venue for the Olympic Games Tokyo 1964, Tokyo’s newly inaugurated Olympic Stadium has been reimagined for the Olympic Games Tokyo 2020 and constructed with multiple Dow technologies.

EPA Celebrates 50 Years of Progress in Advancing Chemical Safety

Since 1970, the EPA has promoted innovation and advanced the science needed to reduce the environmental impacts associated with design, manufacturing, and use of chemicals.

March 12, 2020

In commemoration of the U.S. Environmental Protection Agency’s (EPA) 50th anniversary, the agency is celebrating progress that has been made in advancing chemical safety.

Polylactic Acid Polyols in Urethane Reactive Hot-Melt and Solventborne Adhesives

In addition to a low carbon footprint, polylactic acid brings value to multiple applications through performance attributes such as a high modulus, excellent solvent and grease resistance, and food contact compliance.

William Coggio

Mike Gehrung

Matt Tjosaas Danielle Varecková

March 12, 2020

Polylactic acid (PLA) is a well-known bio-based thermoplastic polymer.

SIKA CORP.: Easy-to-Remove Elastic Butyl Sealant

Recommended applications for SikaLastomer-714 include the sealing of bolt-in parts to vehicle flanges (i.e., truck sliders), as well as the sealing of gaskets to various substrate materials.

March 12, 2020

Sika Corp. recently introduced its SikaLastomer-714 butyl sealant for the U.S. transportation aftermarket.

Housing Production Shows Solid Start to 2020

Regionally in January 2020, combined single- and multi-family housing production increased 31.9% in the Northeast and 1.2% in the West.

March 11, 2020

While total housing starts decreased 3.6% in January 2020, overall permits surged to a 13-year high.

Avery Dennison Announces Change in Board Leadership

Patrick T. Siewert will serve as lead independent director, replacing David E.I. Pyott, who has decided not to stand for reelection so that he may spend time on other endeavors.

March 11, 2020

Avery Dennison Corp. recently announced an upcoming change in the leadership structure of its board of directors.

Nouryon and INEOS Nitriles Break Ground on New Facilities in Germany

The plants, which are due to be completed in 2021-2022, will produce raw materials for Nouryon’s biodegradable chelates.

March 10, 2020

Nouryon and INEOS Nitriles recently announced that they have broken ground on new facilities to be built at INEOS’ Köln site in Germany.

DISPENSE WORKS INC.: Benchtop Vision-Guided Dispensing System

Dispense Works reports that all motion, vision, and control system software for this dispensing system is written in house.

March 10, 2020

Dispense Works Inc. recently announced that its RP series robotic dispensing system with an optional vision-guided component performs pattern recognition and edge/hole detection for simpler setup and fixturing while assuring repeatability.