WEVO-CHEMIE: Silicone Sealant

WEVOSIL 20000 A/B: silicone sealant for stack components in AEM electrolysers and organic flow batteries (Image: © WEVO-CHEMIE GmbH, AI-generated).
WEVOSIL 20000 A/B from WEVO-CHEMIE is a silicone sealant designed for use in the alkaline environments of AEM electrolysers and flow batteries. In addition to its chemical resistance, the material offers mechanical stability and optimized electrical properties. Application can be manual, semi- or fully automated.
Alkaline electrolytes, elevated operating temperatures, sustained compression – in AEM (anion exchange membrane) electrolysers and certain flow batteries (such as organic redox flow batteries), conditions for sealants and adhesives are highly demanding. WEVOSIL 20000 A/B has been specially developed for these environments and ensures the reliable sealing of stack components. The product can also be used as an adhesive if required.
For initial testing and manual applications, WEVOSIL 20000 A/B can be applied in liquid form with standard twin-cartridge systems thanks to its 1:1 mixing ratio. In series production, the material is usually applied directly to cell components such as bipolar plates, the gas diffusion layer, the flow frame or the membrane electrode assembly (MEA). Depending on the groove configuration and component design, different sealing geometries with variable widths and heights can be achieved. Due to its low viscosity, WEVOSIL 20000 A/B can also flow into undercuts.
Processing via dispensing or screen printing also supports an efficient, scalable production process. Moreover, curing at elevated temperatures of 100 to 140 °C in a convection oven or in combination with an IR (infrared) heater can shorten cycle times. The material then cures tack-free within 1 to 2 minutes.
Learn more at wevo-chemie.com.
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!




