Finished Adhesives and Sealants - Articles - Page 489

Green Material Profiles

February 1, 2011

The Green Material Profiles is a comprehensive listing of green raw materials and formulated adhesives and sealants. Use this guide throughout the year to find and formulate sustainable, green materials from renewable ingredients. To be included in the next edition, contact Managing Editor Teresa McPherson at mcphersont@bnpmedia.com.

A New Building Standard

February 1, 2011

More U.S. building contractors are switching to polyether-based sealants and adhesives for performance, safety, and low VOCs.

Q&A About Polyurethanes

Jay A. Johnston Ph.D. Steven Reinstadtler

February 1, 2011

A lot of recent discussion has focused on making construction adhesives and sealants green by eliminating formaldehyde, plasticizers or solvents. Are there similar alternatives for the coatings that are often

FOCUS ON: Dow Named Research Partner for U.S.-China Clean Energy Consortium

February 1, 2011

Jackson The Dow Chemical Co. has been selected by Lawrence Berkeley National Laboratories (LBNL) as a research partner for the new U.S.-China Clean Energy Research Center (CERC) Consortium on Building

Viscosity 101

Many factors need to be considered when devising meaningful viscosity tests for adhesives and sealants.

Robert McGregor David Moonay Ph.D.

October 1, 2010

Most people in the adhesives and sealants industry are aware of viscosity and realize that it characterizes the way a material will flow. More technically speaking, viscosity refers to a material's resistance to flow; it can be measured in various ways, depending on the application.

Pressure-Sensitive Adhesives 101

This article explains what a pressure-sensitive adhesive is, how it is constructed and what adhesive options are available.

Kurt Schramer

October 1, 2009

Pressure-sensitive adhesives (PSAs) are used in applications ranging from labeling food packaging to assembling electronic devices to mounting graphics displays. Although they have been around for decades and their use is widespread, manufacturers, converters, and printers may not understand the key differences between the adhesive choices available, how they’re constructed, or which are best suited for a particular job.

Fire-Retardant Adhesives

This article examines the external events that have led to greater awareness of adhesives’ performance in the event of a fire, the standards and regulations that are being imposed, and the development of new fire-resistant materials.

Edward M. Petrie

November 1, 2007

Historically, fire resistance has not generally been a significant requirement when specifying adhesive systems. Recent incidents, however, indicate that this may soon change. These include events outside of the formulators’ arena, such as increased sensitivity to the performance of components in a fire, and events within the formulators’ arena, such as the development of flame-resistant additives.

Product Profile

Butyl Rubber: A Primer

What is butyl rubber and how is it used?

October 1, 2007

Butyl rubber is a copolymer of isobutylene and isoprene. Simple copolymers are known as “regular” or “clear” butyl rubber, or simply “butyl.” When butyl rubbers are modified after polymerization with the halogens bromine or chlorine, a second family, known as halobutyl rubber (or halobutyls), results.

Biodegradable Polymers in Adhesive Systems

Many biodegradable polymers are suited for adhesive applications, such as environmentally friendly packaging, recyclable envelope adhesives and biomedical devices.

Edward M. Petrie

June 1, 2007

Significant advances have been made over the past 20 years in the development of biodegradable polymers. These materials have been developed in a variety of forms, and thus have potential use in a range of industries, including adhesives.

Safety First: Safe Handling of Adhesives and Sealants

While cured adhesives and sealants are generally considered safe, care must be taken with airborne particles, decomposition products, and uncured components.

Edward M. Petrie

March 1, 2007

Completely cured adhesives and sealants are generally considered safe and non-toxic, although caution must be exercised when machining or grinding joints due to airborne particles. Also, decomposition products may exhibit substantial vapor pressures that present health and safety issues. However, it is exposure to uncured components that can be the most harmful, and that is the subject of this article.