Articles Tagged with ''mixers''

CHARLES ROSS & SON CO.: Mobile High-Shear Mixers

A mobile skid allows these mixers to be used anywhere in a plant, saving time and money by eliminating the need for multiple mixers separately dedicated to each vessel or product.

June 4, 2020

ROSS inline high-shear mixers from 1-250 HP reportedly accelerate mixing, emulsification, and homogenization in both recirculation and continuous modes.

Ross double planetary mixer turnkey sanitary

CHARLES ROSS & SON CO.: Double-Planetary Mixer Sanitary Turnkey System

The company reports that the unit’s jacketed mixing vessel and special high-viscosity blades are a dynamic combination for producing thick gels, pastes, putties, and other semi-solids under precise temperatures.

February 27, 2020

Charles Ross & Son Co. recently announced that its double-planetary mixer is available in a “super sanitary” turnkey configuration, featuring a common stainless steel workbench for both the mixer and matching discharge system.

Ross mixer with powder induction manifold

CHARLES ROSS & SON CO.: Triple-Shaft Mixer with Powder Induction Manifold

According to Ross, SLIM incorporates powder or liquid phases directly into the rotor-stator mix head, causing instant wet-out as it rotates at 3,600 rpm.

January 21, 2020

The latest 600-gal Ross VersaMix model VM-600 is reportedly capable of high-speed subsurface powder induction with the proprietary Ross solids/liquid injection manifold (SLIM).

Ross Names Langhorn Vice President of Sales

Langhorn joined the company in 1998 and has served in positions of increasing responsibility over the years.

November 26, 2019

Charles Ross & Son Co. recently announced the appointment of Ken Langhorn to the position of vice president of Sales.

Sulzer Highlighting Adhesive Application Systems at MatDispens

Sulzer personnel will showcase the company’s offering for Indian manufacturers at booth A26 in hall V at MatDispens.

October 23, 2019

Sulzer recently announced that it will display its packaging, mixing, and dispensing solutions for adhesives at MatDispens, which will be held November 14-16 in Mumbai, India.

Charles Ross & Son ultra high shear mixer

CHARLES ROSS & SON CO.: Ultra-High-Shear Mixer

According to the company, the 11,300-ft/min tip speed and proprietary geometry of the MegaShear mixing head generate a level of shear typically unseen among rotor/stator mixers.

October 8, 2019

The MegaShear from Charles Ross & Son Co. is an ultra-high-shear rotor/stator mixer that is reportedly ideal for high-throughput emulsification, dispersion, and homogenization.

CHARLES ROSS & SON CO.: Skid-Mounted Powder Induction and Mixing System

The SLIM rotor/stator reportedly generates a powerful vacuum without the aid of external pumps and pulls powders directly into the mix chamber, promoting instantaneous wet-out under high-shear conditions.

September 10, 2019

The model HSM-405SC-25 from Charles Ross & Son Co. is an inline high-shear rotor/stator mixing system incorporating solids/liquid injection manifold (SLIM) technology.

MOLTENI S.R.L.: Laboratory Vacuum Double-Planetary Mixer

According to Molteni, the mixer’s two planetary shafts and the orbital rotation of the gearbox and scraper are driven by their own hydraulic motor for two independent motions.

August 22, 2019

Milan, Italy-based Molteni s.r.l. recently announced the introduction of its new vacuum-rated, 14-L (3.7-gal) double-planetary mixer model RHBB14, which is reportedly designed for processing highly viscous products under full vacuum.

CHARLES ROSS & SON CO.: Planetary Dual Dispersers and Advanced Discharge Systems

According to Ross, the system delivers processing power for new-generation batteries, adhesives, composites, pharmaceuticals, coatings, and chemicals.

August 6, 2019

Charles Ross & Son Co. recently announced the newest addition to its planetary mixing line of industrial mixers, the planetary dual disperser (PDDM).

Ross Completes Plant Expansion in China

Nantong Ross Mixing Equipment Co. Ltd., a joint venture for the past 20 years, supplies ribbon blenders, high-shear mixers, vertical blenders, and other product lines for the Chinese market.

July 15, 2019

Charles Ross & Son Co. recently announced the completion of a major expansion of its facility in Nantong, China.

This annual Midwest coatings conference combines all of the high-quality technical presentations, exhibits and networking opportunities from the Coatings Trends and Technologies and Powder Coating Summit conferences into one new event. The event caters to both liquid and powder coatings formulators and manufacturers.

As the industry’s premier international event, WAC 2026 offers a unique opportunity for professionals from every continent to connect, collaborate, and shape the future of the sector.