Pressure-Sensitive Adhesives (PSAs)

RSS

A number of standard test methods are used in the U.S. to measure the peel adhesion or bond strength of pressure-sensitive labels.

The criminal element has discovered the thousands of uses for adhesive tape, and it is being found more and more often as trace evidence at crime scenes. By far the most common tape found as evidence in two out of three cases involving adhesive tape is duct tape. 

Significant advances have been made over the past 20 years in the development of biodegradable polymers. These materials have been developed in a variety of forms, and thus have potential use in a range of industries, including adhesives.

Completely cured adhesives and sealants are generally considered safe and non-toxic, although caution must be exercised when machining or grinding joints due to airborne particles. Also, decomposition products may exhibit substantial vapor pressures that present health and safety issues. However, it is exposure to uncured components that can be the most harmful, and that is the subject of this article.

Pressure-sensitive adhesives (PSAs) are a combination of several materials that come together to form a "construction." A PSA construction is a combination of layers including a facestock (label) or backing (tape), an optional primer coat, an adhesive, and a silicone release coating on a protective liner. The PSA construction—whether a label, tape or transfer adhesive—is manufactured through several coating and laminating steps, including liner-release coating, adhesive coating/drying/curing, optional facestock or backing primer coating, and lamination of the facestock or backing to the liner.