The Multi-Purpose Laboratory Mixer (MP-L) from Jaygo was specifically designed for the research and development of powders, liquids, granulations, and paste products commonly manufactured in the pharmaceutical, cosmetic, food, and chemical industries.
Aremco's Corr-Paint™ CP4080 is a single-part, silicone-based coating system formulated to protect large aluminum and steel structures used in demanding industrial applications to 1100 degrees F (593 degrees C).
UV Process Supply, Inc. has announced the introduction of CON-TROL-CURE® New UV Intensity Labels, paper-thin, photochromatic, pressure-sensitive labels that change color upon receiving a UV dose.
To eliminate twisted, messy, unusable adhesive tubes, Henkel Corp. has introduced new Loctite® QuickTite® Instant Adhesive Gel, a general-purpose instant adhesive packaged in an innovative, self-piercing, spill-proof bottle that won't leak into a pocket or toolbox.
Dow Automotive has pioneered an innovative technology in the development of structural foam inserts (SFIs) to support vehicle body stiffness and handling performance attributes on a range of vehicle types.
TAH Industries Inc. recently added a 4-inch diameter stainless steel mixer to its Series 130 line of sanitary mixers, allowing improved flow rate and efficiency in mixing larger quantities.
TRA-DUCT 921U02 is a silver, medium-viscosity epoxy adhesive with a high glass-transition temperature and a working life of three months that can be cured in only 30 minutes at 150°C or more slowly at lower temperatures.
Board Laminating: Process Expertise from Start to Finish, a six-page, full-color pocket-folder brochure from National Adhesives, provides easy-to-follow information about the company's resin, dextrin and hybrid-formulation laminating adhesives.
RSS