The first two products in the new Ti-Pure™ Sustainability series include Ti-Pure TS-6300 and Ti-Pure TS-6200. Both are existing grades specifically designed to empower coatings formulators to create high-quality, long-lasting products that reduce material consumption and CO₂ emissions.

The report studies the trends in the specialty pressure-sensitive tapes industry by looking at the market from a regional perspective, application perspective, and materials point of view. It forecasts how the market will develop over the next three years, and the trends and developments that will drive growth.

The detailed report includes forecasts for each country, the development of sales, demand per application, trade, and production. For the eight largest countries in Europe, market data is broken down in detail for the different adhesive types and adhesive technologies, including waterborne adhesives, hot melts, solventborne adhesives, reactive adhesives, and other technologies.

Formulated with a blend of resins and ceramic spheres, the elastomeric-acrylic coating was specifically developed as a primer coat for wood siding. SPC also offers protection on many other substrates including concrete, brick, masonry and stucco. In addition, SPC offers energy-saving insulation properties and soundproofing.

The group says the new portal will simplify product identification and enable faster access to key product information. The product portal contains SI Group offerings across a wide range of end markets, including fuels and lubricants, polyolefins, elastomers, and coatings.

The custom-built ROSS FDA-3500 has a maximum working capacity of 3,500 gallons, a two-zone stainless steel dimpled jacket for heating/cooling, a 4” pneumatic discharge valve, and an explosion-proof load cell system rated for up to 20,000 lbs. 

A new, multifunctional polymer additive for powder coating formulations makes the formulation easier to disperse during extrusion by promoting pigment wetting and effectively reducing melt viscosity.

DOPAG has added two progressive cavity pump systems for 1K and 2K materials to its product range: rotordis for processing single-component materials, and rotormix for metering and mixing multi-component materials. 

Apart from having a bio-based content of more than 30%, Jowatherm GROW 853.20 is very resource friendly and can be processed at temperatures starting from 120 °C.

H.B. Fuller and HSMG have partnered to pair HSMG PROTĒAN^® CupKOTE™ with H.B. Fuller Swift^®tak adhesives to provide a commercial-ready, poly-free, water, oil and grease barrier solution for single-use paper beverage cup manufacturers in North America.