Materials Handling/Processing
RSS

Ross mixer with powder induction manifold

CHARLES ROSS & SON CO.: Triple-Shaft Mixer with Powder Induction Manifold

According to Ross, SLIM incorporates powder or liquid phases directly into the rotor-stator mix head, causing instant wet-out as it rotates at 3,600 rpm.

January 21, 2020

No Comments

The latest 600-gal Ross VersaMix model VM-600 is reportedly capable of high-speed subsurface powder induction with the proprietary Ross solids/liquid injection manifold (SLIM).

Surface Treatment with Atmospheric Plasma

The chemistry of an atmospheric plasma surface treatment must be adopted to the targeted process.

Nicolas Vandencasteele

January 21, 2020

No Comments

Most polymers have a low surface energy, which results in difficulties when further processing (e.g., coating, printing, or gluing) and requires the use of surface treatment to increase the surface energy.

Nordson Advanced Technology K.K. Japan Moves to New Office and Demonstration Center

With the expanded demonstration center and office space, the company has consolidated its fluid dispensing and conformal coating, test and inspection, and plasma treatment equipment into one location.

December 5, 2019

No Comments

Nordson Corp. recently announced that Nordson Advanced Technology K.K. Japan has relocated to new larger office and demonstration facilities in central Tokyo to deliver sales, service, technical training, and support to its customers and sales network in Japan.

EIRICH: Process Data Visualization Software

As browser-based software that is not tied to any specific platform, ProView works with any controller.

December 3, 2019

No Comments

ProView process data visualization from EIRICH reportedly enables simple and quick analysis of process values.

Ross Names Langhorn Vice President of Sales

Langhorn joined the company in 1998 and has served in positions of increasing responsibility over the years.

November 26, 2019

No Comments

Charles Ross & Son Co. recently announced the appointment of Ken Langhorn to the position of vice president of Sales.

Scheugenpflug to Premier New Material Prep and Feeding Unit at productronica

An evolution of Scheugenpflug’s A310 system, LiquiPrep reportedly offers high feeding performance, easy maintenance, and long service life.

October 22, 2019

No Comments

Scheugenpflug recently announced that it will present its new LiquiPrep material preparation and feeding unit for the first time in hall A4, booth 454, at productronica, which will be held November 12-15 in Munich, Germany.

Enercon to Display Corona, Plasma, and Flame Surface Treating Technologies at K 2019

Visitors to the company’s stand will reportedly have the opportunity to explore five electrode assemblies featuring variations of high-powered ceramic and stainless steel electrodes.

October 16, 2019

No Comments

Enercon Industries recently announced that it will showcase hands-on displays that cover its range of corona, plasma, and flame surface treating technologies at K 2019.

HENKEL: Surface Treatment for Aluminum Processing

Henkel’s latest new developments in this area include three products: Bonderite C-IC 65001, Bonderite M-NT 2040 R9, and Bonderite M-NT 65000.

October 15, 2019

No Comments

Henkel recently announced new REACh-compliant Bonderite products for etch passivation and corrosion protection that are reportedly chromium-free, allow the toxicity labeling to be removed, and reduce the user’s carbon footprint thanks to fewer active steps.

Charles Ross & Son ultra high shear mixer

CHARLES ROSS & SON CO.: Ultra-High-Shear Mixer

According to the company, the 11,300-ft/min tip speed and proprietary geometry of the MegaShear mixing head generate a level of shear typically unseen among rotor/stator mixers.

October 8, 2019

No Comments

The MegaShear from Charles Ross & Son Co. is an ultra-high-shear rotor/stator mixer that is reportedly ideal for high-throughput emulsification, dispersion, and homogenization.

UNION TOOL CORP.: Dual-Lane Plywood Core Feeder

The core feeder automatically feeds two stacks of plywood cores up to 12 in. wide into Union Tool hot-melt roller coaters.

October 2, 2019

No Comments

The Union Tool Corp. recently introduced a new core feeder for feeding plywood cores to engineered flooring laminating systems.

The next generation of rosin esters offer excellent bonding strength, significantly light color and high stability, providing adhesive formulators with a new choice of high-performance biobased tackifiers.

The ASSEMBLY Show focuses exclusively on assembly technology, equipment, and products. Attendees have the opportunity to uncover new resources, experience equipment hands-on, evaluate the latest technologies and products, and connect face-to-face with industry experts.

Materials Handling/Processing
RSS

CHARLES ROSS & SON CO.: Triple-Shaft Mixer with Powder Induction Manifold

Surface Treatment with Atmospheric Plasma

Nordson Advanced Technology K.K. Japan Moves to New Office and Demonstration Center

EIRICH: Process Data Visualization Software

Ross Names Langhorn Vice President of Sales

Scheugenpflug to Premier New Material Prep and Feeding Unit at productronica

Enercon to Display Corona, Plasma, and Flame Surface Treating Technologies at K 2019

HENKEL: Surface Treatment for Aluminum Processing

CHARLES ROSS & SON CO.: Ultra-High-Shear Mixer

UNION TOOL CORP.: Dual-Lane Plywood Core Feeder

Adhesives and Sealants Magazine

June 2020

Materials Handling/Processing RSS

Materials Handling/Processing
RSS