Columns

RSS

QUESTION: I see many so-called “five-minute” epoxy adhesives (and sometimes ones with even shorter cure times). Are these adhesives truly strong and durable?

QUESTION: We want to bond steel to foamed polystyrene in large bond areas, and we want to use a cost-effective adhesive that doesn’t take long to dry. Is a hot melt the way to go?

The industry will soon gather in Minneapolis for the Adhesive and Sealant Council’s (ASC) Fall Convention and Expo, which will be held October 21-23 at the Hilton Minneapolis.

I am developing an adhesive for an application that requires heat resistance greater than 80°C. A formulation based on a waterborne polyurethane polymer currently provides the best adhesion to the substrate and is a fit for the application process. What approaches can be used to achieve the required level of elevated temperature performance?

Most manufacturers are currently or have been involved in some form of lean process. Your company may be well down the path or just starting out, or your customers or suppliers may be going lean. The Lean Enterprise Institute characterizes lean as “creating more value for customers with fewer resources.”

I'm writing this column in the midst of a very busy week. Sometime between conference calls and podcast recordings, I realized how little time I now need to spend on tasks that—even just a few years ago—took up the majority of my day.

QUESTION: The adhesives we use are now available from more than one supplier. How can we feel comfortable when changing to a new supplier?

When the Toxic Substances Control Act (TSCA) was enacted in 1976, most people interested in chemicals regulation lauded it as the greatest and most advanced piece of chemical legislation of their time.

Welcome to our second annual ASI Top 25 issue!

QUESTION: We are successfully structurally bonding Belgian Blue Stone—also called Petit Granit (a non-porous limestone material)—with a two-component epoxy in an industrial process.