Featured Stories
RSS

Changes in Dispensing Technologies for Tapes and Hot Melt Adhesives

July 26, 2000

The technology for hot melt adhesives has been the number-one choice among high-volume, high-speed paperboard and fiberboard packagers for decades.

Understanding High-Viscosity Mixing

June 1, 2000

To better understand the ramifications of high-viscosity mixing, let’s first review a much simpler case — that of turbulent flow in low-viscosity mixing.

Acrylic Compound Prevents Loosening of Aircraft Cable-Connector Backshells

June 1, 2000

During the pre-check of a new electronic control system, flight engineers of the U.S. Air Force Worldwide Airborne Command detected a cable-connector loosening problem.

Asphalt-Modified Polyurethanes Show Advantages in Construction Sealants

Poly bd resins are used in adhesives, sealants, castable elastomers, caulks, membranes, foams, coatings, propellant binders, potting and encapsulating compounds, as well as other rubber-fabricated materials.

June 1, 2000

Poly bd resins, from Elf Atochem North America Inc., Philadelphia, are liquid, hydroxyl-terminated homopolymers of butadiene. The facile reaction of Poly bd resins with curing agents such as conventional di- and polyisocyanates provides an economical route to the preparation of general-purpose elastomers. The unique structure of these resins provides properties that surpass conventional polyether and polyester urethane systems, as well as conventional, general-purpose rubbers.

James C. Myers Receives ASTM Award of Merit

June 1, 2000

James C. Myers has received a 1999 American Society for Testing and Materials (ASTM) Award of Merit from ASTM Committee C24 on Building Seals and Sealants.

Dispensing Equipment Reduces Production Time and Cost for Electronics Manufacturer

June 1, 2000

A leading contract manufacturer of electronic control, display and sensor products has reduced labor and material costs through the use of an innovative potting compound-dispensing system.

Chemicals Used in Caulks and Adhesives for Construction to Exceed $2 Billion in 2003

June 1, 2000

Demand for chemicals used in construction caulks and adhesives will advance 5.0 percent annually to over $2 billion in the year 2003.

Compact Metering Pump Helps Adhesive Manufacturer Out of a Sticky Situation

June 1, 2000

The company discovered the 504S metering pump from Watson-Marlow Bredel, Wilmington, Mass., which made life easier.

Evaluating Compatibility of UV-Cure PSAs With Silicone-Release Technologies

June 1, 2000

We initiated a program to evaluate the release performance of today’s emerging developmental ultraviolet pressure sensitive adhesive (UV-PSA) products against representative silicone-release coating systems available from Rhodia Inc.

Blending Resins For SIS-Based Nonwoven, Hot Melt Adhesives

May 16, 2000

This article investigates the effect on adhesive performance of blending a fully hydrogenated hydrocarbon resin with different grades and amounts of pure monomer aromatic hydrocarbon resins.

This annual event provides current and future leaders in the adhesives and sealants industry with the opportunity to expand their knowledge and network with peers.

Organized by Women in Chemicals, this landmark conference will offer opportunities for networking, learning, and professional development. With a diverse array of sessions, workshops, and social events, participants can expect a dynamic program designed to empower and inspire.

Featured Stories
RSS

Changes in Dispensing Technologies for Tapes and Hot Melt Adhesives

Understanding High-Viscosity Mixing

Acrylic Compound Prevents Loosening of Aircraft Cable-Connector Backshells

Asphalt-Modified Polyurethanes Show Advantages in Construction Sealants

James C. Myers Receives ASTM Award of Merit

Dispensing Equipment Reduces Production Time and Cost for Electronics Manufacturer

Chemicals Used in Caulks and Adhesives for Construction to Exceed $2 Billion in 2003

Compact Metering Pump Helps Adhesive Manufacturer Out of a Sticky Situation

Evaluating Compatibility of UV-Cure PSAs With Silicone-Release Technologies

Blending Resins For SIS-Based Nonwoven, Hot Melt Adhesives

Keep the info flowing with our newsletters!

Get the latest industry updates tailored your way.

Featured Stories RSS

Keep the info flowing with our newsletters!

Get the latest industry updates tailored your way.

Featured Stories
RSS